PEN Plastic Film

 

  

     PEN Plastic Film

     1) Mateials

     PET : Polyethylene Terephthalate

     PEN : Polyethylene Naphthalate

   2)PEN Film

    Size : 297mm x 210mm x 125umTh

         

     ITO (Indium Tin Oxide) Coated PEN Film

ITO PEN is an electro-conductive plastic film for a transparent electrode. The polyethylene naphthalate (PEN) film is used as the substrate, which has high transparency, high thermo-stability, low moisture permeability, and high chemical stability. The sheet resistance is less than 15 ohm/sq.

Substrate Characteristic of PEN Film[297x210x125umTh]

Characteristic	Test Method	Unit	PEN
Tensile Strength	Base on JLS C-2318	MPa	280
Tensile elongation	Base on JLS C-2318	%	90
Consecutive use temperature (mechanical)	UL-746B	ºC	160
Consecutive use temperature (electrical)	UL-746B	ºC	180
Glass transition point	TDFJ method by DMA	ºC	1550
Melting point	DSC	ºC	269
Breakdown voltage	JIS C-2318	Kv/mm	300
Dielectric constant (1KHz)	JIS C-2318	-	2.9
Absorbing water rate	TDFJ method	%	0.3
Density	JIS C-2151	g/cm3	1.36
Flame resistance	UL-94	-	VTM-2

Specification of ITO PEN

Substrate	Polyethylene naphthalate
Size	200 x 250mm
Thickness of Film	0.125mm
Transmission	>80% @ 555nm
Sheet resistance	<15 ohms/sq

 

ITO Coated PEN Plastic Film,

 0.125mmThickx210mmWx297mmL ,12 ohm/sq , PEN layer=0.125 mm, ITO layer>180 nm

Indium-Tin-Oxide (ITO) coated plastic film

Plastic materials:  PEN (DuPont  Teijin Teonex ) film-Q65HA

Coating method: Magnetron sputtering

Dimension:  210 mm width  x 297 mm L   x 0.125 mm Thickness
PEN layer=0.125 mm, ITO layer>180 nm
*Resistivity:  12 ohm/sq, the transparency is >=75% and haze: 3%
PEN is with glass transition temperature (Tg) of 120 degree centigrade, 42 degree centigrade higher than that of PET films

 

 제품에 대한 문의사항이 있으시면 아래 e-mail, 전화 문의 바랍니다.

       MSE : 02-2275-9510     팩스 : 02-2278-5446                         

        msescy@hanmail.net   http://semims.com