COPPER CONDUCTIVE TAPE & FOIL

 

Copper Foil & Form

    

Copper Foil for Battery Anode Substrate Conductive Carbon Double Sided Coated (280mm width x 11um thick, 1.3 kg/roll) - EQ-CC-Cu-20-1	Copper Mesh Foil for Battery Anode Substrate (240mm width x 45um thickness x 20 Meter L) - EQ-bccnf-45u	Copper Mesh Foil for Battery Anode Substrate (280mm width x 9um thickness) with Optional Length- EQ-bccnf-9u
Copper Foil for Battery Anode Substrate (190 m L x 280mm W x 9um thick) - EQ-bccf-9u	3 Pcs Copper Foam Sheet (Porous Cu) for Battery or Supercapacitor Anode Substrate (300mm length x 80mm width x 0.08mm thickness) - EQ-bccf-80um	Copper Foil: 25um Thickness x 150mm Width x 90 Meter Length - EQ-bccf-25u
Copper Foil: 6.0 um Thickness x 280mm Width x 333 Meter Length - EQ-bccf-6u-280mm Cu - Substrates &polycrystalline Porous Copper Foam Sheet for Battery or Supercapacitor Anode Substrate (100mm length x 80mm width x 0.08mm thickness) - EQ-bccf-80um	Copper Foil: 6.0 um Thickness x 30mm Width x 2000 Meter Length - EQ-bccf-6u-30mm

Copper Conductive one Side.Both SideTape                                                            

         *원하는 사이즈로 절단 가능(W*L 16.5M)

 

#Copper Conductive One Side Tape(#1181)

Properties Typical Values
Backing thickness 1.4 mil (0,04mm)
Total thickness (backing plus adhesive) 2.6 mil (0,07mm)
Breaking strength 1 25 lb/in (44 N/10mm)
Adhesion to steel 1 35 oz/in (3,8 N/10mm)
Electrical resistance through adhesive 2 0.005 ohm
Flame retardancy 3 Pass
* Footnote: 1. Test method ASTM D 1000
2. MIL-STD-202 Method 3 07 maintained at 5 psi (3,4 N/cm 2) measured over 1 in 2 surface area. Conductive particles in the adhesive provide the
electrical path between the application substrate and the foil backing.
3. UL-recognized for flame retardancy per UL 510, Product Category 0ANZ2, File E17385.

 

#Copper Conductive Both Side Tape (#1182)  

Properties Typical Values
Backing thickness  1.4 mil (0,04mm)
Total thickness (backing plus adhesive on both sides) 3 3.5 mil (.088mm)
Breaking strength  25 lb./in (44 N/10mm)
Adhesion to steel  35 oz/in (3,8 N/10mm)
Electrical resistance through adhesive 2 0.010 ohm
Flame retardancy  Pass
* Footnote: 1. Test method ASTM D 1000
2. MIL-STD-202 Method 307 maintained at 5 psi (3,4 N/cm2) measured over 1 in2 surface area. Conductive particles in the adhesive provide the
electrical path between the application substrate and the foil backing.
3. UL-recognized for flame retardancy per UL 510, Product Category 0ANZ2, File E17385.                                    

                             

               Copper Foil

  

                  

1) 0.009T*280W*10M  2)0.025T*150W*10M  2A)0.2T*400W*L 3)0.03T*200W*L 4) 0.05T*200W*L

5) 0.1T*400W*L 6)0.15T*200W*L  7)0.2T*400W*L  8)0.25T*200W*L 9)0.3T*300W*L 

10)0.4T*300W*L  11)0.5T*300W*L 12)0.8T*400*1200L (mm)

                   

   제품에 대한 문의사항이 있으시면 아래 e-mail, 전화 문의 바랍니다

          MSE : 02-2275-9510     팩스 : 02-2278-5446

             msescy@hanmail.net  http://semims.com